Akasa 40mm X 10mm Chipset Fan Blue Led Ak160bls
| Mini Kaze LED, 40mm x 10mm Quiet Cooling Fan Discontinued | |
| More variations available Show | |
Scythe Mini Kaze LED, 40mm x 10mm Quiet Cooling Fan
The Mini Kaze, an ideal replacement for any 40mm chipset, external HDD case cooling fan and removable case cooling fan.
Introducing Scythe's quiet 40mm fan to help reduce the noise of your already quiet PC system. This fan is an ideal replacement for any 40mm chipset, external HDD case cooling fan and removable case cooling fan.
Features
- 40mm white fan with blue LEDs!
- Noise level 14.0 dB(A)
- 2-pin and 3-pin connectors
- Great value
- Perfect for Chipset/VGA Cooling
| Specifications | Mini Kaze LED |
|---|---|
| Fan size (edge to edge) | 40 mm |
| Model | SY124010L-LED |
| Air volume at full speed (12V), CFM ±10% | 7.7 |
| Noise level at full speed (12V), dB(A) | 14 |
| Fan speed at full speed (12V), RPM ±10% | 3500 |
| Weight, g | 65 |
| Approximate cable length | 11cm 2-pin, 22 3-pin |
| Life expectancy @ 25°C continuous use | 2 years |
| Power connector | 3-pin and 2-pin |
| Bearing type | Sleeve |
| Accessories | 2-pin to 3-pin converter |
| Fan depth | 10 mm |
| Rated voltage | 12 VDC |
| Warranty | 24 months |
| Specifications | Mini Kaze LED |
|---|---|
| Fan size (edge to edge) | 40 mm |
| Model | SY124010L-LED |
| Air volume at full speed (12V), CFM ±10% | 7.7 |
| Noise level at full speed (12V), dB(A) | 14 |
| Fan speed at full speed (12V), RPM ±10% | 3500 |
| Weight, g | 65 |
| Approximate cable length | 11cm 2-pin, 22 3-pin |
| Life expectancy @ 25°C continuous use | 2 years |
| Power connector | 3-pin and 2-pin |
| Bearing type | Sleeve |
| Accessories | 2-pin to 3-pin converter |
| Fan depth | 10 mm |
| Rated voltage | 12 VDC |
| Warranty | 24 months |
See Also
FAQ
-
How do I measure fan size?
The size of fan you need will generally be determined by the size of the fan fitting position in your PC case. The sizes of all the fans on our website are shown as measured along any one of the fan's four sides, NOT the distance between the fan's screw holes! Our most popular fan size is 120mm, followed by 80mm. This isn't really dictated by customer preference, but more by recent designs of PC cases.
As for the thickness (depth) of the fan, generally 25mm (1 inch) is by far the most common depth, although smaller fans can have shallower depths such as 15mm or even 10mm. All our fans are 25mm thick unless otherwise stated. If you have any questions about which fan you should order, please don't hesitate to get in touch.
If you know the distance between the fan mounting screw holes but don't know what fan size to order, please see the following table. Note that the mounting hole measurements shown below are taken horizontally or vertically between the holes and not diagonally.
Screw hole spacings and fan sizes
Space Between Screw Holes Fan Size 32mm 40mm 40mm 50mm 50mm 60mm 60mm 70mm 72mm 80mm 83mm 92mm 105mm 120mm -
I received a small cable (resistor) with my fan; what is it for?
The resistor cable (also called Ultra Low Noise or ULN cable) is designed to allow the fan to run slightly slower for even quieter operation. The benefit in lower running noise is significant. Although the airflow will be reduced slightly, this usually has minimal effect on PC temperature. We would generally recommend using the ULN resistor cable for best results in almost all circumstances.
-
How can I tell which way the air blows through the fan?
Hold the fan so that the round fan sticker is facing you. You are looking at the rear of the fan. When you plug the fan in, the air will be blowing towards you. If you want a fan to act as an air intake, then the fan sticker will be facing the inside of the case. Some fans also have two small arrows moulded into their plastic housing - one arrow shows the direction of airflow, and the other (at 90°) shows the direction of blade rotation.
-
Is it possible to use a 4-pin PWM fan or CPU cooler with a motherboard which has only 3-pin fan headers on it?
Electrically, there is no problem doing this - the fourth pin on the fan cable is used purely for PWM control and is not needed in order for the fan to run. So you can plug the 4-pin fan connector onto the 3-pin motherboard fan header, leaving the fourth pin not connected to anything. The fan will potentially run at full speed, so if you would like to reduce the speed of the fan you will need to adjust the fan speed setting in your BIOS or use fan control software such as SpeedFan in Windows.
The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid.
Another avenue to explore is the possibility of using a bay-mounted fan controller. Several models are available now which provide 4-pin fan headers, so this is an easy way to use 4-pin PWM fans in a PC system which has only 3-pin fan headers on its motherboards. When using this method, you may find it necessary to disable any fan warning settings in your motherboard BIOS, since the motherboard may incorrectly believe that its CPU fan has failed when the fan is connected to a fan controller rather than directly to the motherboard itself.
Top Ultra-Quiet 40mm Fans
Recently Viewed Products
Very happy
PC arrived wellpacked and as described. I had a minor technical issue to discuss and had prompt and helpful telephone advice which sorted the problem. Highly recommended.
(Review via Trustpilot)
Call Us
- Telephone: +44 1653 668 000
- Accounts: +44 1653 668 003
- Technical: +44 1653 668 005
- Fax: +44 1653 668 001
Our Address
Quiet PC Ltd
Brawby Grange
Brawby
Malton
YO17 6PZ
United Kingdom
Source: https://www.quietpc.com/mini-kaze-led
Post a Comment for "Akasa 40mm X 10mm Chipset Fan Blue Led Ak160bls"